The products manufactured by the Hot Rolling mill at Jahan Foulad Gharb are produced using high-quality Bloom with an optimal alloy composition. Combined with rigorous supervision throughout the manufacturing process and laboratory test results confirming a uniform microstructure with excellent chemical and mechanical properties, Jahan Foulad Gharb products, marketed under the JFCO brand, comply with the Iranian National Standard ISIR 16348 and are fully competitive with international manufacturers.
One of the key advantages of the products manufactured by the Jahan Foulad Gharb rolling mill is the application of a uniform heat treatment process using a reheating furnace capable of heating various Bloom sizes and lengths while minimizing oxidation and decarburization. In addition, the use of state-of-the-art technology ensures products with standard dimensions, precise tolerances, and superior mechanical properties.
Mechanical (tensile) testing of the Steel Beams produced by the rolling mill is carried out using advanced testing equipment, including a 60-ton Universal Tensile Testing Machine.
Jahan Foulad Gharb is capable of manufacturing Steel Beams in sizes 10, 12, 14, 16, as well as H-Beams, in a variety of weights, including lightweight Steel Beam sections.
Introduction to Steel Beams
Steel Beams are the most fundamental structural sections used in a wide range of building, civil engineering, and industrial projects. A Steel Beam consists of three main components: two parallel Flanges that form the outer edges of the beam, and a thick vertical steel section positioned between them, known as the Web. Structural loads transferred to the Steel Beam are primarily carried by these two components—the Flanges and the Web. Variations in the dimensions and cross-sectional geometry of the Flanges and Web have led to the development of different beam standards. Steel Beams are available in various types, each with distinct structural characteristics and applications, including standard Steel Beams, normal Steel Beams, and H-Beams.
Depending on the type, scale, and Steel Beam requirements of a structure, the cost of Steel Beams—and steel products in general—is one of the key factors affecting the overall project cost. The price of Steel Beams depends on several factors, including the manufacturer’s quality, the beam type, and its dimensions. Before purchasing Steel Beams, it is important to know that products available on the market are generally classified into two categories: lightweight and standard-weight sections. Steel Beams produced by Esfahan Steel Company are recognized as the highest-quality domestic products and are manufactured with standard weights. Their weight is based on the Stahl standard tables, which is one of the reasons they are generally priced higher than other alternatives.
IPE beam
Daily Price List of IPE Beams in Various Sizes
The technical specifications of each product, including its type, size, price, and applicable standard, are provided in the table below.
IPE Beams are available in various sizes, as outlined below:
IPE 80, IPE 100, IPE 120, IPE 140, IPE 160, IPE 180, IPE 200, IPE 220, IPE 240, IPE 270 ,IPE 300, IPE 330, IPE 360, IPE 400, IPE 450, IPE 500, IPE 550, IPE 600
The dimensions and sizes of IPE steel beams depend on their type. These dimensions are:
| characteristic | symbol |
|---|---|
| flange Height | h |
| web thickness | ts |
| flange width | b |
| flange thickness | tg |
| section | A |
| Weight per meter | G |
Example of Measurement: The dimensions of an IPE 120 Beam are as follows:
h= 120mm / ts= 4.4mm / b= 64mm / tg= 6.3mm / A= 13.2cm2 / G= 10.4 kg/m
IPN beam
Daily Price List of IPN Beams in Various Sizes
The technical specifications of each product, including its type, size, price, and applicable standard, are provided in the table below.
IPN Beams are available in various sizes, as outlined below:
IPN 80, IPN 100, IPN 120, IPN 140, IPN 160, IPN 180, IPN 200, IPN 220, IPN 240, IPN 260, IPN 280, IPN 300, IPN 320, IPN 340, IPN 360, IPN 400, IPN 450, IPN 500, IPN 550,
IPN Beam Dimensions and Specifications depend on their type. These dimensions are:
| characteristic | symbol |
|---|---|
| flange Height | h |
| web thickness | ts |
| flange width | b |
| flange thickness | tg |
| section | A |
| Weight per meter | G |
Example of Measurement: The dimensions of an IPN 120 Beam are as follows:
h= 120mm / ts= 5.1mm / b= 58mm / tg= 7.7mm / A= 14.2cm2 / G=11.1 kg/m
How Many Types of Steel Beams Are Manufactured in the Industry?
- In general, Steel Beams are classified into two main categories: H-Beams and I-Beams.
What Are the Advantages of Using Steel Beams in Construction?
- The ability to connect multiple structural components, reduced space occupancy compared to concrete structures, and other structural benefits.
Which Standards Are Used for Manufacturing Steel Beams?
- The standards used for manufacturing this product include the following.
IPB – IPE – IPN
Purchase guide
- View and review product prices.
- Add the required product (type and quantity) to the inquiry form.
- Enter your contact information.
- Our sales specialists will contact you and provide a pro forma invoice.
- Complete the payment and track the shipment until delivery with the assistance of Jahan Foulad Gharb specialists.
inquiry form
Frequently Asked Questions
This process is explained in detail in the Purchase Guide section.
All prices quoted in the pro forma invoice include VAT and are based on Ex-Works (EXW) delivery from the factory.
بسته به نوع ماشین و محل تخلیه متفاوت است.
Jahan Bar Foulad Company, in cooperation with Jahan Foulad Gharb, is ready to provide transportation services for your ordered shipments.
Jahan Bar Foulad Company Contact Number:
All loading and shipping operations are carried out by Jahan Bar Foulad Company in the shortest possible time. Delivery time may vary depending on the destination.